ADDRESS-DATA
BBG dB-Soft MZ-08SOFT

SOFTWARE FOR
Personal Computer
MZ-800 series

Instruction manual
Bedienungsanleitung
Manuel d'Instructions
Manuale di istruzione

SHARP

Counter reading of program on the disk:

  4 ADVOKA
 99 HEAD DRIVER
168 EGG.BAS
238 ACCOUNT MANAGEMENT
262 ADDRESS DATA

Program Quick Disk
Page A:
3-D WAY OUT
SUPERBIORHYTHM
DATA UNIVERSAL
PAGE B:
BATTLE.BAS
MOG MOG.BAS

Pay attention when loading the program to
mode MZ-700 or MZ-800 (see descrption of
game).

SW1/ON = MZ-700 Mode
SW1/OFF = MZ-800 Mode

ADDRESS DATA (machine-language)

This program is loaded like the delivered BASIC
(C: Cassette Tape). However, the computer
before has to be set to the MZ-700 mode (see
page 73 of the operation manual). This file was
written in machine language and enables the
user to input, to recall and to administer his
addresses. The user can input up to 800 data
and process them at the same time. This also
depends on the length of the data records. The
different data fields have the following names:

Name
Street
Town
Telephone
Birthday
Comment

In the lower screen area by a command-list the
possible commands are displayed for the user.
The print-out routines for the printer are
specially adapted to the plotter MZ-1P16.

Summary of different commands:

I (Insert)
Via this command data can be input into the
file. 64 characters per line are allowed.
Capital and small letters can be used.
Cursor-control- and gaphic-keys are blocked.
'DEL' is allowed.

S (Search)
Via this command data can be searched. The
data are also found when not situated at the
beginning of a line. Always all terms are
being searched.

K (Kill)
The displayed data-record is deleted. For
security reasons this only possible after
"S" (Search).

C (Change)
Via this command you can alter the data
records. The data-record to be altered has
previously to be searched by the commands.
The keys 'INST' and 'DEL' are allowed.

P (Print)
Via this command all data records are one
after the other displayed on the screen. If
the plotter was switched on before, the output
is made on it.

H (Hardcopy)
In case of switched on printer the data
record at this moment being displayed on the
screen is printed on the plotter.

4 (40 char.)
Via this command the printing format of the
switched on plotter is fixed to 40 characters
per line.

8 (80 char.)
Via this command the printing format of the
switched on plotter is fixed to 80 characters
per line.

Configuration of the function-keys:

F1 (LOAD)
Via this command data stored on a cassette
are being read into the main memory.

F2 (SAVE)
Via this command data being in the main
memory are stored onto cassette.

F3 (Plotter on/off)
Via this command the built-in ploter is
switched-on resp. off. In case of switched on
plotter "PR" is displayed on the screen.

F4 (Labels on)
Via this command on print-out of the plotter
only the first three data fields are printed
(label-print).

F5 (Labels off)
Via this command the command F4 (Labels on)
is cancelled, i.e. on doing the print-out on
the plotter all data fields are printed.


Zhlerstand der Programme auf der Kassette:

  4 ADVOKA
 99 HEAD DRIVER
168 EGG.BAS
238 ACCOUNT MANAGEMENT
262 ADDRESS DATA

Programme Quick Disk
Seite A:
3-D WAY OUT
SUPERBIORHYTHM
DATA UNIVERSAL
Seite B:
BATTLE.BAS
MOG MOG.BAS

Achten Sie beim Laden der Programme auf den
Modus MZ-700 oder MZ-800 (siehe Spielbeschreib-
ung).

SW1/ON = MZ-700 Mode
SW1/OFF = MZ-800 Mode


ADDRESS-DATA (Maschinensprache)

Dieses Program wird wie das mitgelieferte
BASIC geladen (C: Cassette Tape). Jedoch mu
der Computer vorher in den MZ-700 Modus
geschaltet werden (siehe Seite 73 im Bediener-
handbuch).

Diese Datei wurde in Maschinensprache ge-
schrieben und ermglicht es dem Benutzer seine
Adressen einzugeben, abzurufen und zu ver-
walten.

Der Benutzer kann bis zu 800 Daten eingeben und
gleichzeitig bearbeiten. Dieses richtet sich
auch nach der Lnge der Datenstze. Die
einzelnen Datenfelder haben folgende Namen:

Name
Street
Town
Telephone
Birthday
Comment

Dem Benutzer werden mittels einer Befehlsleiste
im unteren Bildschirmbereich die mglichen
Befehle angezeigt. Die Ausgaberoutinen fr den
Drucker sind speziell auf den Plotter MZ-1P16
angepat.

Zusammenfassung der einzelnen Befehle:

I (Insert)
ber diesen Befehl knnen Daten in die Datei
eingegeben werden. 64 Zeichen pro Zeile sind
zulssig. Gro- und Kleinbuchstaben knnen
verwendet werden. Cursorsteuerung- und
Graphiktasten sind gesperrt. 'DEL' ist
zugelassen.

S (Search)
ber diesen Befehl knnen Daten gesucht
werden. Die Daten werden auch gefunden, wenn
sie nicht am Anfang einer Zeile stehen. Es
werden stets alle Begriffe durchgesucht.

K (Kill)
Der angezeigte Datensatz wird gelscht. Zur
Sicherheit ist es nur nach 'S' (Search)
mglich.

C (Change)
Mit diesem Befehl knnen Sie Datenstze ver-
ndern. Der zu ndernde Datensatz mu vorher
mit dem Befehl S (Search) gesucht werden. Die
Tasten 'INST' und 'DEL' sind zugelassen.

P (Print)
Mit diesem Befehl werden alle Datenstze auf
dem Bildschirm nacheinander ausgegeben. Wenn
der Plotter vorher eingeschaltet worden ist,
erfolgt die Ausgabe auf diesem.

H (Hardcopy)
Bei eingeschaltetem Drucker wird der augen-
blicklich auf dem Bildschirm angezeigte
Datensatz auf dem Plotter ausgegeben.

4 (40 Char.)

Mit diesem Befehl wird das Druckformat des
eingeschalteten Plotters auf 40 Zeichen pro
Zeile festgesetzt.

8 (80 Char. )
Mit diesem Befehl wird das Druckformat des
eingeschalteten Plotters auf 80 Zeichen pro
Zeile festgesetzt.

Belegung der Funktionstasten:

F1 (LOAD)
Mit diesem Befehl werden auf Cassette ge-
speicherte Daten in den Hauptspeicher einge-
lesen.

F2 (SAVE)
Mit diesem Befehl werden im Hauptspeicher be-
findliche Daten auf Cassette eingespeichert.

F3 (Plotter on/off)
Mit diesem Befehl wird der eingebaute Plotter
ein- bzw. ausgeschaltet.
Bei eingeschaltetem Plotter wird oben auf dem
Bildschirm 'PR' ausgegeben.

F4 (Labels on)
Mit diesem Befehl werden bei Ausgabe auf dem
Plotter nur die ersten 3 Datenfelder ausge-
geben. (Etikettendruck)

F5 (Labels off)
Mit diesem Befehl wird der Befehl F4 (Labels
on) rckgngig gemacht, d. h. es werden bei
der Ausgabe auf dem Plotter alle Datenfelder
ausgegeben.